Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Shocks

RockShox Monarch XX
$395.00
RockShox's Monarch XX is a wolf in sheep's clothing. It's got tons of heavyweight performance with an air spring's weight. So, it's light enough to race on and tough enough for hard-charging trail bikes. Perfect. Its oversize aluminum construction delivers smooth action, and the Solo Air spring makes set up a snap. Plus, setting your sag is unbelievably easy with the anodized gradient marks on the Fast Black piston. And for those long fire road climbs, sprints during races, and riding from your house to the trail, you've got RockShox's XLoc hydraulic remote lockout for the ultimate in efficiency.
Manitou 12.5mm Shock Mount Hardware
$8.00
- Two machined aluminum spacers (some kits may include a sleeve) for mounting one end of Manitou rear shocks (air or coil) - Sold as a set of two spacers: two sets required per shock, one per each eyelet - Sized by bolt diameter: M6, M8, or M9.5 (3/8-inch) and frame mount ID width (in mm) - This hardware is for <2010 shocks with 12.5mm eyelets
RockShox Vivid/Kage Coil Spring (240 x 76mm)
$36.00
To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.
RockShox Monarch RL Shock
$269.00
Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 2 position compression (Open/Pedal) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Solo Air - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over R: Lockout - OTHER: Weight based on 165x38mm, standard air can, no hardware
RockShox Vivid/Kage Coil Spring (267 x 89mm)
$36.00
To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.
Cane Creek DB Rear Shock Steel Spring (3-inches)
$35.00
Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.
RockShox Super Deluxe RCT
$579.00
Solid Threshold adjustment for pedaling performance, compression adjustment to fine tune the ride to any trail and condition, and the proven performance of RockShox’s revolutionary Super Deluxe rear shock in a package that’s ready to tackle any challenge. - Native metric design - Simple, effective air volume tuning system - Independently tunable compression circuits / checked rebound - New DebonAir friction reductions match RockShox’s forks and improve traction - Refined rebound damping enhances rider control - Expanded range of external rebound damping adjustment - 2-position compression adjustment (Open/Pedal) with low speed compression adjustment in Open mode
RockShox Vivid R2C Rear Shock
$459.00
From downhill racing to extreme freeride, the RockShox Vivid R2C combines extreme durability with the precise adjustments that matter when you're going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression. Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. - Intended Use: Downhill - Counter Measure for zero force stroke initiation - Dual Flow Adjust absorbs big hits while staying active through small hits - Switch for on the fly toggle between full and open compression - Eye to eye length: 240mm / 9.5 inches - Stroke: 76mm / 3 inches - Eyelet Diameter: 12.7mm - Positive Spring: Coil - External Adjustments: Rebound Damping , High Speed Compression Damping , Low Speed Compression Damping * Spring sold separately
RockShox Monarch Plus RC3
$507.00 - $509.00
Monarch Plus provides traction-gaining suppleness, giving you more control over any type of terrain – all in a lightweight bombproof package. Proven Rapid Recovery and DebonAir technologies come standard for this lightweight big hitter. Now with twice the rebound range, Monarch Plus allows you to take your riding to levels you never thought possible with a short and mid travel air shock. - Intended Use: Trail, Enduro - RC3 shocks feature external rebound and 3-Position compression adjustment (Open/Pedal/Lock) - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - DebonAir spring requires less force to initiate travel, offering plusher, more sensitive suspension while holding on to big-hit progressiveness - Fast Black hard anodized, forged aluminum body with sag gradients - For this rear shock, bike/frame specific mount hardware is included
RockShox Monarch R Shock
$239.00
Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 290g - DAMPING: External rebound - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OTHER: Weight based on 165x38mm, standard air can, no hardware
RockShox Vivid/Kage Coil Spring (216/222 x 70mm)
$36.00
To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.
Cane Creek DBair CS Rear Shock
$695.00
No one knows your ride better than you. The DBAIR was built upon the Double Barrel legacy to become the first air-sprung rear shock featuring Twin Tube technology and 4-way independent adjustability combined with an unrivaled level of quality. The DBAIR enables custom, rider-tuned damping performance, optimizing every bike for every rider. Cane Creek’s all new CS is the most innovative climbing feature available. Traditional climbing modes only address half of climbing dynamics, requiring the rider’s body to respond to the rest. Double Barrel CS provides climbing-specific damping in both compression and rebound. Keeping suspension fully active while you climb results in better connection to the trail and increased efficiency without annoying pedal-bob. When you’re ready to descend, it’s all Double Barrel. After all, what goes up MUST go down… DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. WEIGHT - ~509 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression - Low speed compression - High speed rebound - Low speed rebound - Air spring rate SHAFT MATERIAL - Aluminum 7075 SHAFT DIAMETER - 8mm FINISH - Anodized and laser-etched MOUNTING INTERFACE - Norglide bushing 1/2" Universal Axle CAN SIZE - Standard (All Lengths), Extra Volume (200, 216, 222, 240)
RockShox Deluxe RT3
$409.00
First, we took the proven damping performance of our popular Monarch series and introduced it to a new metric-sized chassis. Increased bushing overlap, a new bushing design, and a new scraper seal decreased friction and increased durability. Now we’ve changed the interior surface to improve lubrication and accelerate piston movement – further friction reductions that keep the tires firmly planted on the ground. The result is truly Deluxe. - Native metric design - Simple, effective air volume tuning system - 3-position compression adjustment (Open/Pedal/Lock) - External Rebound adjustment
Cane Creek DBair IL Rear Shock
$475.00
Introducing the DBAIR [IL], an all-new twin-tube inline shock with superior performance and reliability. The first shock to feature Cane Creek’s LinEair Spring, the DBAIR [IL] is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. When developing the DBAIR [IL], Cane Creek's engineering team brought forth great advancements in design and manufacturing processes, all devised to make the shocks more robust compared to the previous generation. The fully loaded functions of the DBAIR [IL] far outstrips other inline shocks and now offers even greater performance and reliability to unleash the full potential of trail and enduro bikes. DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. LinEair SPRING The DBAIR [IL] is the first shock to feature Cane Creek's LinEair Spring. Requiring a lower force to activate, the LinEair Spring provides the consistent feel of a coil shock from the initial stroke, full support during mid stroke and the added bonus of a progressive air spring curve when deep in the travel. WEIGHT ~397 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression -Low speed compression - High speed rebound - Low speed rebound - Climb Switch On/off SHAFT MATERIAL - Aluminum 7075 SHAFT DIAMETER - 8mm AIR SPRING - LinEair Air Spring FINISH - Anodized and laser-etched MOUNTING INTERFACE - High performance low friction IGUS bushing 1/2" Universal Axle
Page 1 of 1